Records from 2016 to 2017. Most recent: inspection, 24 January 2017.
Inspection history · 5
24 January 2017
Internal Structural Exam · Drydock Exam · Examination of Repairs · Administrative Inspection
Physical examination · Sector San Juan · USCG Southeast District (CGD-SE) · Activity 6075552
20 December 2016
COI Inspection · MTSA/ISPS Verification · DAPI Audit
Physical examination · Marine Safety Unit Saint Thomas · USCG Southeast District (CGD-SE) · Activity 6060387
14 March 2016
Plan Review "T" Boat
Administrative · Marine Safety Unit Saint Thomas · USCG Southeast District (CGD-SE) · Activity 5832897
20 January 2016
Hull Examination · Internal Structural Exam
Physical examination · Marine Safety Unit Saint Thomas · USCG Southeast District (CGD-SE) · Activity 5800366
7 January 2016
DAPI Audit · COI Inspection · MTSA/ISPS Verification
Physical examination · Marine Safety Unit Saint Thomas · USCG Southeast District (CGD-SE) · Activity 5788269
Engineering › Bilge Water Management System › Pump
Issued 28 January 2017
Resolved
The vessel does not have UL submersible pumps. The vessel was given 30 days to replace 50% of the pumps with UL and 60 days to replace the second 50%.
Condition: Improper Installation
Due 28 March 2017
Resolved 21 February 2017
Resolution: The vessel rep has replaced all of the bilge pumps with UL rates RULE 2000 electric submersible bilge pumps
Electrical › Electric Supply System (service) › Cable
Issued 24 January 2017
Resolved
Wiring for the VHF antenna in the fwd strage area is not IAW regulations.
Action required: 705 - Other - as specified
Resolved 27 January 2017
Resolution: VHF wires properly connected and protected in the fwd storage space.
Engineering › Steering Gear System › Rudder
Issued 24 January 2017
Resolved
Port rudder has delamination and STBD rudder has water saturation.
Action required: 705 - Other - as specified
Resolved 28 January 2017
Resolution: Both rudders were repaired. Saturated foam removed and replaced with single cell foam. Infrastructure replaced with marine grade lumber. Reglassed.
Engineering › Gasoline Engine (propulsion) › Cylinder (4 cycle)
Issued 20 December 2016
Resolved
port outboard engine not starting
Action required: 705 - Other - as specified
Resolved 7 January 2017
Resolution: changed out computer module
Construction/Loadline › Hull › Hull Plating
Issued 20 January 2016
Resolved
Crop and renew rotted area in way of Port Side Head OBD through hull fitting.
Action required: 705 - Other - as specified
Due 3 February 2016
Resolved 28 January 2016
Resolution: Damaged area grinded to good material. Inserted new marine grade plywood with West Sys. Refiberglassed with a layup schedule of; biaxel, cloth, biaxel, cloth with all West system products. Throughhull fitting re-installed fwd of original location.
Engineering › Steering Gear System › Rudder Stock
Issued 20 January 2016
Resolved
Make permanent repairs to bent rudder post on port side rudder.
Action required: 705 - Other - as specified
Due 3 February 2016
Resolved 28 January 2016
Resolution: Rudder removed. Shaft straightened in metal shop and fiberglass repaired to make watertight.