OCEAN RAY

Where flexible nonmetallic hose is permitted for use in piping systems by this section, it must meet SAE J-1942 The following restrictions apply:(1) Flexible nonmetallic hose must be complete with factory-assembled end fittings requiring no further adjustment of the fittings on the hose, or field attachable type fittings may be used. Hose end fittings must comply with SAE J-1475. In systems and applications where flexible hoses are permitted to be clamped:(1) Double hose clamping is required where practicable;(2) The clamps must be of a corrosion resistant metallic material;(3) The clamps must not depend on spring tension for their holding power; and(4) Two clamps must be used on each end of the hose, or one hose clamp can be used if the pipe ends are expanded or beaded to provide a positive stop against hose slippage. *In both port and starboard, all fuel flexible gasoline hoses after the fuel tank were found to be Synflex brand, marking 34M1-05, which does not meet the requirement for having fire sleeve protection, and not to be double clamped to prevent hose slippage from its fitting. 46 CFR 182.720(e) and 46 CFR 182.410

A visual and audible alarm must be provided at the operating station to indicate a high water level in each of the following normally unmanned spaces. Bilge high-level visual and audible alarm is not operational. 46 CFR 182.530(a)

Fuel lines must be accessible, protected from mechanical injury, and effectively secured against excessive movement and vibration by the use of soft nonferrous metal straps which have no sharp edges and are insulated to protect against corrosion. Port fuel line was chaffed due to vibration, replace and insulate.