Records from 2016 to 2022. Most recent: inspection, 2 February 2022.
Documentation record
Registered dimensions (L × B × D)58.4 ft × 29.0 ft × 8.5 ft
Registered tonnagegross 94 / net 64
ITC dimensions (L × B × D)Not recorded
ITC tonnageNot recorded
BuilderMARINERS HARBOR, NY, UNITED STATES · built 1932
Hull materialSteel
PropulsionDiesel Reduction
Hull shapeUNSPECIFIED
Hull configurationUNSPECIFIED
Hailing portNEW YORK, NY
Trade endorsementsCoastwise, unrestricted
DocumentationExpired · issued 30 June 2004
Service, as the file records itPassenger (Inspected)
Hull formpowered (Maury's inference from propulsion, hull shape, material and length, rule hf-1; not a recorded fact)
Tonnage as PSIX records it94 - Regulatory (Subpart C or D), Gross Ton
64 - Regulatory (Subpart C or D), Net Ton
Every line above is a field of the National Vessel Documentation Center's file as served by NOAA Fisheries, dated 10 August 2026, matched to this hull on its Official Number. Registered and ITC measurements are two systems and are never combined. One snapshot is held so far; documentation history begins with the next.
Inspection history · 16
2 February 2022
Administrative Inspection
Administrative · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 7389622
3 May 2021
Administrative Inspection · Drydock Extension
Administrative · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 7188384
16 April 2021
Annual Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 7176340
27 January 2020
DAPI Audit · Deficiency Check · COI Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6883149
1 May 2019
Internal Structural Exam · Hull Examination
Physical examination · Sector New York · USCG Northeast District (CGD-NE) · Activity 6674494
14 March 2019
Annual Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6634191
25 February 2019
Examination of Repairs
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6648776
19 February 2019
Examination of Repairs
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6629484
29 November 2018
In-Service Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6589200
27 March 2018
Annual Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6366075
26 May 2017
Inclining Experiment
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6155502
26 May 2017
Annual Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6155530
27 February 2017
Plan Review "T" Boat
Administrative · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6095324
8 December 2016
Hull Examination · Internal Structural Exam
Physical examination · Sector New York · USCG Northeast District (CGD-NE) · Activity 6054365
29 November 2016
In-Service Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 6052473
20 April 2016
Annual Inspection
Physical examination · Marine Safety Unit Coram · USCG Northeast District (CGD-NE) · Activity 5858559
11 - Life Saving Appliances › N/A - No Subsystem › Lifebuoys incl. provision and disposition
Issued 27 January 2020
Resolved
Life ring on board was purchased without retro reflective tape. vessel rep had purchased a new roll of solas approved retro tape and installed as required.
Condition: Placed in Improper Service
Action required: 10 - Deficiency Rectified
Due 27 January 2020
Resolved 27 January 2020
Resolution: Instaled retro-reflective tape as required
11 - Life Saving Appliances › N/A - No Subsystem › Lifebuoys incl. provision and disposition
Issued 27 January 2020
Resolved
Floating electric water light was found missing a screw cap, securing the light to the casing and ensuring water tight integrity.
Condition: Improper/Lack of Maintenance
Action required: 10 - Deficiency Rectified
Due 27 January 2020
Resolved 27 January 2020
Resolution: Found screw securing the top of the floating electric water light to the case in the vicinity of the light housing. Reinstalled screw and tested; all sat
11 - Life Saving Appliances › N/A - No Subsystem › Launching arrangements for survival craft
Issued 27 January 2020
Resolved
Survival craft was secured to the vessel with the floating electric water light wrapped around the bracket. This would've prevented the life float from floating free if the vessel had sunk.
Condition: Improper Installation
Action required: 10 - Deficiency Rectified
Due 27 January 2020
Resolved 27 January 2020
Resolution: Survival craft was and floating electric marker light line was reconfigured to allow for the life float to float free.
11 - Life Saving Appliances › N/A - No Subsystem › Stowage and provision of liferafts
Issued 27 January 2020
Resolved
Floating electric water light was found inoperable for the survival craft.
Condition: Improper/Lack of Maintenance
Action required: 10 - Deficiency Rectified
Due 27 January 2020
Resolved 27 January 2020
Resolution: Vessel rep stated he tested the light prior to the inspection where the light was all sat. Cleaned the contacts and re-tested the light. All SAT
07 - Fire Safety › N/A - No Subsystem › Fire fighting equipment and appliances
Issued 27 January 2020
Resolved
Portable fire extinguisher guage inspected, where the guage was found in the discharged zone of the guage.
Condition: Improper/Lack of Maintenance
Action required: 10 - Deficiency Rectified
Due 27 January 2020
Resolved 27 January 2020
Resolution: Company had spare fire extinguishers inspected and available for in-service. replaced the expended extinguisher.
11 - Life Saving Appliances › N/A - No Subsystem › Maintenance of Life Saving Appliances
Issued 27 January 2020
Resolved
Identified 2 areas on the FRP life float with water intrusion caused by delamination. Issued 01 requirement to repair the life float IAW manufactures recommended repair method of replace the life float with an approved buoyant apparatus.
Condition: Improper/Lack of Maintenance
Action required: 50 - Rectify deficiencies w/in 30 days
Due 26 February 2020
Resolved 5 February 2020
Resolution: A new life float was purchased and installed.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 27 January 2020
Resolved
Breakers in the primary operating station need to be labled
Condition: Improper Installation
Action required: 50 - Rectify deficiencies w/in 30 days
Due 26 February 2020
Resolved 5 February 2020
Resolution: Breakers labled in the pilot house
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 27 January 2020
Resolved
Wiring in the machinery space was spliced using "twist on" type wire connectors for a lighting circuit. remove twist on wire splicing and install IAW 46 CFR 183.340
Condition: Improper Installation
Action required: 50 - Rectify deficiencies w/in 30 days
Due 26 February 2020
Resolved 5 February 2020
Resolution: Wiring in the machinery space was removed and new lighting fixtures were installed and wired using approved butt connections.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 27 January 2020
Resolved
Lighting fixture damaged. MISLE keeps crashing, so further details can be found on the CG-835V.
Condition: Damaged By Earlier Event
Action required: 50 - Rectify deficiencies w/in 30 days
Due 26 February 2020
Resolved 5 February 2020
Resolution: Lighting fixture was replaced with new class 1 div 3 type lighting fixtures and wired appropriately.
11 - Life Saving Appliances › N/A - No Subsystem › Lifebuoys incl. provision and disposition
Issued 27 January 2020
Resolved
Throw line affixed to the life ring; type IV PFD around the equidistant grab lines. throw line must be affixed around the body of the life ring.
Condition: Improper Installation
Action required: 10 - Deficiency Rectified
Due 27 January 2020
Resolved 27 January 2020
Resolution: Life ring recnfigured and corrected on the spot
11 - Life Saving Appliances › N/A - No Subsystem › Rescue boats
Issued 27 January 2020
Resolved
Vessel's rescue platform designed and configured in a way that would not allow for the recovery of a "helpless" PIW IAW 46 CFR 180.120(a)(2), for vessels not required to have a rescue boat
Condition: Improper Installation
Action required: 50 - Rectify deficiencies w/in 30 days
Due 26 February 2020
Resolved 5 February 2020
Resolution: MOB rescue platform was reconfigured with hooked mounting points to allow for rapid deployment and an effectivbe way to recover a helpless victim IAW CFR
Operations/Management › Lifesaving › Op Readiness/Maintenance/Inspection
Issued 18 May 2017
Resolved
Vessel must demonstrate a condition of operational readiness, seaworthiness, and the elimination of safety hazards prior to departing SEC NY AOR.
Action required: 17 - Rectify deficiencies prior to departure
Resolved 23 May 2017
Documentation › Certificates/Documents › Certificate of Inspection
Issued 18 May 2017
Resolved
Vessel must conduct its 2017 annual inspection prior to operating in service.
Action required: 701 - Prior to carriage of passengers/cargo
Due 26 May 2017
Resolved 26 May 2017
Resolution: MI attended vessel and completed a reinspection.