← All vessels
RELENTLESS
- Built
- 1981
- Last inspected
- 6 July 2026
- Documentation
- Valid · NVDC file of 10 August 2026
- Deficiencies
- 94 recorded · 1 without a recorded resolution
- Controls
- None recorded without a removal date
Coast Guard record current through 23 August 2026, retrieved 5 September 2026 from PSIX. Every field on this page was recorded by the Coast Guard. Records for the Passenger Ship class in Maury's sources begin in 2016.
Inspection record
Last inspected
6 July 2026
…with no type recorded1
Deficiencies
94 recorded · 1
without a recorded resolution
Operational controls
None recorded without a removal date
Years with a record
11 calendar years (2016–2026)
Every line above is a count of records the US Coast Guard wrote, or a date it recorded.
A blank resolution means none was recorded in this data; it does not establish that a
deficiency is outstanding. Years with a record are calendar years in which a record
exists, not years in service. What Maury does
not do.
Identity
637909
WDI8735
53224
Flag
UNITED STATES
Maury page id
psix-53224
Documentation record
Registered dimensions (L × B × D)56.0 ft × 19.0 ft × 7.2 ft
Registered tonnagegross 68 / net 46
ITC dimensions (L × B × D)Not recorded
ITC tonnageNot recorded
BuilderSEAWAY BOAT CO · LONG BEACH, CA, UNITED STATES · built 1981
Hull materialWood
PropulsionDiesel Reduction
Hull shapeUNSPECIFIED
Hull configurationUNSPECIFIED
Hailing portSAN DIEGO, CA
Endorsements, as the file codes themcw_un, reg
DocumentationValid · issued 25 June 2026 · expires 30 June 2027
Service, as the file records itPassenger (Inspected)
Hull formpowered (Maury's inference from propulsion, hull shape, material and length, rule hf-1; not a recorded fact)
Tonnage as PSIX records it68 - Regulatory (Subpart C or D), Gross Ton
46 - Regulatory (Subpart C or D), Net Ton
46 - Regulatory (Subpart C or D), Net Ton
Every line above is a field of the National Vessel Documentation Center's file as served by NOAA Fisheries, dated 10 August 2026, matched to this hull on its Official Number. Registered and ITC measurements are two systems and are never combined. One snapshot is held so far; documentation history begins with the next.
Professional
The full record for this vessel
Behind this panel: 21 inspections, each with its date, unit and type; 94 deficiencies with the resolution recorded against each, 1 without one; operational controls, none recorded without a removal date; no tow-unit appearances recorded; 1 other recorded name; the documentation record: dimensions, tonnage, builder, hailing port and endorsements. Every line is a record the Coast Guard wrote; the counts above are the same counts as in the summary, and they are free.
Professional is $39 a month or $299 a year, or $19.99 a month locked for life at the founding rate, for the first 200 subscribers. It unlocks every detail section on every vessel page, fleet watch tied to your account, and ownership records on request. Already a subscriber? Sign in.
Maury does not score, rate or grade vessels, at any price.
Vessel history report
Every record for this hull, in one document — $299
Every recorded inspection, 1972 to 2026, in one chronology · every deficiency, with system, dates and resolution · operational controls imposed and removed · every name this hull has been recorded under · the vessels it was inspected alongside, and when · how its record compares with hulls of similar age and size, as a fact about the population and never a judgement about this vessel.
Read one first, in full: a forty-year chronology · a hull that changed operators four times · the sparse case, shown as an example, not for sale.
This report is in development and is not for sale yet. There is no date, and nothing is charged. Leave an email and we will tell you when it exists, once.
Used only to tell you when the report exists. Not shared, not sold, and not added to a mailing list.
Inspection history · 21
6 July 2026
In-Service Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 8431005
6 May 2025
Deficiency Check · COI Inspection · Re-Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 8108096
15 January 2025
Hull Examination · Internal Structural Exam
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 8064253
17 October 2024
In-Service Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 8020738
5 August 2024
Deficiency Check · Administrative Inspection · Annual Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7974825
31 July 2023
Annual Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7838606
17 April 2023
Administrative Inspection · In-Service Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7670361
6 December 2022
Internal Structural Exam · Examination of Repairs · Drydock Exam
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7605937
1 August 2022
Annual Inspection · Deficiency Check
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7522481
4 August 2021
Administrative Inspection · Annual Inspection · Deficiency Check
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7277318
30 March 2021
Internal Structural Exam · Drydock Exam
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7166576
7 January 2021
Deficiency Check
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 7121238
19 May 2020
Deficiency Check · COI Inspection · Administrative Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6944670
16 October 2019
In-Service Inspection · Deficiency Check
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6835372
15 August 2019
Annual Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6781554
7 March 2019
Drydock Exam · Deficiency Check · Internal Structural Exam
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6638306
10 August 2018
Type not recorded
No type recorded · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6548694
1 August 2018
Annual Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6495746
12 July 2017
Annual Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6196119
10 March 2017
Drydock Exam · Internal Structural Exam
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 6102502
22 June 2016
Annual Inspection
Physical examination · Sector San Diego · USCG Southwest District (CGD-SW) · Activity 5915271
Deficiency record · 94
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 6 July 2026
Resolved
Excessive oil and water was found in bilge indicating a possible leak. Clean engine room of water, oil, and debris for inspection, and identify source of water.
Cite: 46 CFR 176.600(d)
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 24 July 2025
Resolved
The stbd main engine fuel piping was found corroded and spraying atomized fuel on the engine. Replace fuel line with manufacture approved fuel line.
07 - Fire Safety › N/A - No Subsystem › Oil accumulation in engine room
Issued 24 July 2025
Resolved
The engine room bilges were found with excess oil accumulation, creating a fire risk. Remove all oil from engine room bilges.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 24 July 2025
Resolved
The port main engine wet exhaust was found to be leaking in the lazarette. Make repairs and prove proper operation of the system.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Auxiliary engine
Issued 24 July 2025
Resolved
The generator exhaust cooling is supplied from a pump separate of the engine. Provide a suitable warning device (audible or visual) to indicate failure of the exhaust cooling water.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 24 July 2025
Resolved
The port main engine belts and pulleys were found exposed and without a guard. Provide machinery guard for rotating machinery parts.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 24 July 2025
Resolved
The stbd main engine fuel return line and piping was found unsupported and prone to vibrations. Properly secure the return fuel hose and piping.
02 - Structural Conditions › N/A - No Subsystem › Decks - corrosion
Issued 24 July 2025
Resolved
The lzarette stbd side overhead was found with water leaking while the bait tank pump was running. Troubleshoot and repair the ingress of water to the overhead plywood.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 18 July 2025
Resolved
The port main engine was found with splash zone epoxy on the fuel lines, where the return flexible hose makes contact with hard piping fuel line. Run engine under load at high RPM for attending marine inspector to prove integrity of piping / hose.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 18 July 2025
Resolved
The stbd main engine was found with an unsupported hard piped fuel line. The fuel line vibrated excessively while the engine was at higher RPM's. Provide adequate support for fuel line to prevent vibration.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 18 July 2025
Resolved
Conduct underway sea trial to prove repairs to both main engines are sufficient.
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 16 July 2025
Resolved
The generator exhaust piping was found to be leaking in two places in the lazarette. Make permanent repairs to both leaks. 46 CFR 182.310
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 July 2025
Resolved
The stbd galley receptacle was found to be broken and exposing electrical terminals, replace receptacle.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Operation of machinery
Issued 6 May 2025
Resolved
A visual and audible alarm must be provided at the
operating station to indicate a high-water level in each
of the following normally unmanned spaces. All bilge
alarms were inoperable due to the disconnection of the
panel. Vessel may not operate with passengers for hire
until the bilge alarms are tested satisfactory in the
presence of a marine inspector.
46CFR182.530
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 6 May 2025
Resolved
Electrical equipment on a vessel must be installed and
maintained to minimize accidental personnel contact with
energized parts, Receptacle outlets of the type
providing a grounded pole or a specific direct current
polarity must be of a configuration that will not permit
improper connection and must be suitably marked and
identified. The electrical configurations in the
wheelhouse contained exposed wiring, broken junction
boxes, was not suitably marked and was not maintained in
a manner to prevent electrical hazards. Remove unused
wiring, properly dead end all wiring, label electrical
components. Install guards to any operational and moving
belts.
46CFR180.71
11 - Life Saving Appliances › N/A - No Subsystem › Lifejackets incl. provision and disposition
Issued 6 May 2025
Resolved
Each life jacket must be approved in accordance with
46CFR160. Only 36 of the adult life jackets had working
lights and 1 child life jacket had a light installed.
46CFR180.71
11 - Life Saving Appliances › N/A - No Subsystem › Lifebuoys incl. provision and disposition
Issued 6 May 2025
Resolved
Each ring buoy on a vessel must be approved in
accordance with 46CFR160. Vessel had an extra ring buoy
that was no longer serviceable, and vessel was told to
remove it from the vessel.
46CFR180.70
03 - Water/Weathertight Conditions › N/A - No Subsystem › Scuppers, inlets and discharges
Issued 6 May 2025
Resolved
At each inspection for certification and at every other
vessel inspection all observed unsafe practices, fire
hazards, and other hazardous situations must be
corrected and all required guards and protective devices
must be in satisfactory condition. MI found pipe below
the waterline, under the port MDE not properly capped.
Cap pipe to prevent flooding and notify local OCMI once
complete.
46 CFR 176.830
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 6 May 2025
Resolved
All machinery and equipment must be installed and
maintained in such a manner as to afford adequate
protection from causing fire, explosion, machinery
failure, and personnel injury. Exhaust leak located on
generator exhaust system. Repair exhaust piping to
provide leak free exhaust system from port engine.
Notify local OCMI once complete.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 6 May 2025
Resolved
Electrical equipment on a vessel must be installed and
maintained to minimize accidental personnel contact with
energized parts. Dead end wires found on generator.
Remove dead end wiring and update electrical plans.
Notify local OCMI once complete.
46 CFR 183.200 (c)
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 6 May 2025
Resolved
All machinery and equipment must be installed and
maintained in such a manner as to afford adequate
protection from causing fire, explosion, machinery
failure, and personnel injury. Fuel filter bowls were
full of dirt/water. Clean out fuel bowls and notify
local OCMI once complete.
46 CFR 182.100
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 6 May 2025
Resolved
Electrical equipment on a vessel must be installed and
maintained to protect passengers, crew, other persons,
and the vessel from electrical hazards, including fire,
caused by or originating in electrical equipment, and
electrical shock. Generator windings were covered in
grease/dust. Clean generators winding in accordance with
manufactures instructions. Notify local OCMI once
complete.
46 CFR 183.200(b)
07 - Fire Safety › N/A - No Subsystem › Fire fighting equipment and appliances
Issued 6 May 2025
Resolved
At each initial and subsequent inspection for
certification, the owner or managing operator must be
prepared to conduct tests and have the vessel ready for
inspection of its fire protection equipment. portable
fire extinguishers were past service inspection and not
maintained. Service fire extinguishers and replace
defective ones. Notify local OCMI once complete.
46CFR176.810
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 6 May 2025
Resolved
A vessel is inspected for compliance with the standards
required by this subchapter. Machinery, equipment,
materials, and arrangements not covered by standards in
this subchapter may be inspected in accordance with
standards acceptable to the cognizant. Vessel did not
receive a COI and will require a full inspection, in
addition to clearing the listed DEFs. Notify local OCMI
when vessel is ready for inspection.
46CFR176.800
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 6 May 2025
Resolved
The stbd main engine fuel pump and fuel injectors were found to be leaking, make repairs and prove integrity of fuel piping. 46 CFR 182.200-Prior to carrying passengers.
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 6 May 2025
Resolved
The stbd main engine was found to be coated with oil and fuel, thoroughly clean the engine after leaks are repaired. 46 CFR 182.200
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Other (machinery)
Issued 6 May 2025
Resolved
The port main engine alternator was found to be unserviceable and with a melted conductor attached, replace alternator and conductor. 46 CFR 183.200- Prior to carrying passengers.
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 6 May 2025
Resolved
The bilge system manifold piping has flexible hose installed without double hose clamps, provide double hose clamps for all flexible hoses. 46 CFR 182.710
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 6 May 2025
Resolved
The stbd main engine turbo was found without heat protection lagging and was smoking oil while engine was running, provide turbo lagging and clean oil from turbo to prevent smoking. 46 CFR 182.200
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 6 May 2025
Resolved
The stbd main engine sea strainer was not secured and supported by the hoses attached, properly mount the sea strainer. 46 CFR 182.200
10 - Safety of Navigation › N/A - No Subsystem › Lights, shapes, sound-signals
Issued 6 May 2025
Resolved
The mast head light was found to inoperable, prove proper operation of the light. 46 CFR 183.420
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Other (machinery)
Issued 6 May 2025
Resolved
The generator / shore power breakers were found without an interlock device. Provide breakers with proper interlock device to prevent both breakers from being energized simultaneously. 46 CFR 183.390
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 6 May 2025
Resolved
The forepeak bilge switch wiring was found with exposed wire nuts for connectors, provide connections with permanent crimped connectors. 46 CFR 183.340
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 6 May 2025
Resolved
The engine room bilge alarm wiring was found with exposed wire nuts for connectors. Place wire nuts inside electrical j-box or make connections crimped and sealed.
07 - Fire Safety › N/A - No Subsystem › Means of escape
Issued 15 January 2025
Resolved
Vessel completed dry dock and has not completed IFR / Egress modifications or drills. Vessel is prohibited from carrying overnight passengers or allowing passengers in the bunk rooms until modifications are made and an egress drill is completed.
02 - Structural Conditions › N/A - No Subsystem › Hull - corrosion
Issued 15 January 2025
Resolved
Remove carpet in all lower / middle bunk spaces for inspection of interior hull side-shell.
03 - Water/Weathertight Conditions › N/A - No Subsystem › Covers (hatchway-, portable-, tarpaulins, etc.)
Issued 15 January 2025
Resolved
Provide lazarette hatch with gasket and retaining chain/cable.
02 - Structural Conditions › N/A - No Subsystem › Electrical installations in general
Issued 15 January 2025
Resolved
Provide j-box in lazarette, port side with cover.
02 - Structural Conditions › N/A - No Subsystem › Steering gear
Issued 15 January 2025
Resolved
Both rudder bearings were found to be wasted and serviceable, replace with new.
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 15 January 2025
Resolved
Provide 02 sea valves with new handles.
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 15 January 2025
Resolved
Cap unused sea water piping in E/R port side.
09 - Working and Living Conditions › 091 - Living Conditions › Sleeping room
Issued 17 October 2024
Resolved
Bunk room lower bunk have carpet on the inside of the side-shell. Remove carpet for inspection of interior hull.
07 - Fire Safety › N/A - No Subsystem › Fire detection and alarm system
Issued 9 August 2024
Resolved
Smoke detector in the wheel-house is inoperable. Replace the wheel-house smoke detector and conduct a satisfactory test of all smoke detectors in the presence of a USCG marine inspector.
Cite: 46 CFR 181.405(c)
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 8 August 2024
Resolved
Electrical equipment exposed to the weather must be watertight. Discovered that the wheel-house emergency batteries are mounted out on deck, exposed to the elements, in a battery box that is not watertight. Move the wheel-house battery box and batteries within the wheel-house or place them in an approved watertight enclosure.
Cite: 46 CFR 183.210(b)
11 - Life Saving Appliances › N/A - No Subsystem › Buoyant apparatus
Issued 8 August 2024
Resolved
Hydrostatic release for the Inflatable Buoyant Apparatus (IBA) was found mounted upside down. Reinstall the hydro right side up.
Cite: 46 CFR 180.130(a)(1)
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 8 August 2024
Resolved
Improperly Dead-ended wires found in the wheel-house, lazarette, and engine room. Dead-ended wires in the bilge were an especially high hazard since the bilge was oil soaked. Remove all improperly dead-ended wires or properly terminate them with pressure type connectors.
Cite: 46 CFR 183.340(g)
08 - Alarms › N/A - No Subsystem › Other (alarms)
Issued 8 August 2024
Resolved
Approximately half of the vessel's bilge alarms were inoperable. Repair/replace the bilge alarms and conduct a satisfactory test of them in the presence of a USCG marine inspector.
Cite: 46 CFR 182.520
07 - Fire Safety › N/A - No Subsystem › Oil accumulation in engine room
Issued 8 August 2024
Resolved
Excessive oil was identified in the engine room bilge. Clean excessive oily water from bilge and offload it to shore. To be rectified by 22 August 2024.
Cite: 46 CFR 182.100 & 46 CFR 176.830
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 8 August 2024
Resolved
Identified electrical wires routed low in the engine room bilge. Route electrical wires as high as practicable above the bilge in the engine room. To be rectified by 22 August 2024.
Cite: 46 CFR 183.05-50(a)(Old-T) & 46 CFR 183.05-50(b)(Old-T)
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 8 August 2024
Resolved
Discovered an extension cable plugged into an outlet with majority of the cable coiled in a wet sink. Remove the extension cable.
Cite: 46 CFR 176.830
01 - Certificates & Documentation › 011 - Ships Certificates › Certificate of Inspection (COI)
Issued 5 August 2024
Resolved
Your vessel must undergo an annual inspection within the 3 months before or after each anniversary date. Vessel had their annual scheduled for August 5th, 2024, but some unforeseen maintenance caused them to rescheduled. Vessels COI will expire on August 6th, 2024. They have their annual scheduled for August 7th,2024.
46 CFR 176.500
17 - Rectify deficiencies prior to departure
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Propulsion main engine
Issued 31 July 2023
Resolved
All machinery be installed and maintained in such a manner as to afford adequate protection against fire explosion, machinery failure, flooding and personnel injury. Replace wasted heat exchanger on STBD engine.
Tighten shaft packing on starboard shaft.
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 31 July 2023
Resolved
[withheld — contains personal information; the deficiency system, dates, and resolution status are shown above]
02 - Structural Conditions › N/A - No Subsystem › Beams, frames, floors-op. damage
Issued 31 July 2023
No resolution recorded
Must submit repair proposal to OCMI and repair wasted wood found in overhead near Engine compartment entrance. Correct at next dry docking.
07 - Fire Safety › N/A - No Subsystem › Fixed fire extinguishing installation
Issued 31 July 2023
Resolved
Pre-engineered must Automatically shut down all power ventilation systems and all engines that draw intake air from within the protected space. Fire boy leads for engine/generator shut-downs were found disconnected from system and switched to over ride function on the bridge. Discrepancy was corrected on the spot.
09 - Working and Living Conditions › 092 - Working Conditions › Safe means of access
Issued 17 April 2023
Resolved
Prior to the carriage of passengers, Vessel operator must contact [email withheld] to schedule an in
service Inspection for the testing of the interconnected
fire detection and alarm system.
07 - Fire Safety › N/A - No Subsystem › Means of escape
Issued 17 April 2023
Resolved
Small passenger vessels that have overnight accommodations for passengers must comply with the requirements in 46 CFR 177.500; construction/arrangement and means of escape. No overnight passengers allowed until vessel meets 46 CFR 177.500.
08 - Alarms › N/A - No Subsystem › Other (alarms)
Issued 1 August 2022
Resolved
Submit plans for review of the vessel's watch monitoring devices as per the interim rule.
11 - Life Saving Appliances › N/A - No Subsystem › Lifebuoys incl. provision and disposition
Issued 1 August 2022
Resolved
Refresh vessel name and retro-reflective tape on all lifebuoys.
02 - Structural Conditions › N/A - No Subsystem › Steering gear
Issued 4 August 2021
Resolved
Port and Starboard steering bearings worn beyond repair. Bearings should be replaced with approved type bearings.
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 4 August 2021
Resolved
Found port main exhaust lagging to be missing. Replace lagging in accordance with manufacturers instruction.
09 - Working and Living Conditions › 092 - Working Conditions › Machinery
Issued 4 August 2021
Resolved
Port main exhaust cooling hose found to be chaffed and worn beyond repair. Hose should be replaced with approved type.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Found dead end wire on positive side of starter. Wire should be removed or connected to appropriate component.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Wire from engine room fwd knife switch found to have exposed dead end. Dead end wire should be removed or connected to appropriate component.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Two wires from engine room starboard cable transit found to have exposed dead end. Dead end wires should be removed or connected to appropriate component.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Two circuits from engine room switchboard distribution panel are installed with 16 gage wire. Circuits are required to be installed with a minimum 14 gage wire.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Main starter batteries found to be missing servicing caps. Approved battery caps should be installed according to manufacturers instructions
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Main starter batteries found to have loose terminals contacting the battery box. Terminals should be adjusted to not contact the battery box and connections tightened.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Main starter batteries found to not be secured inside the battery box. Restraints should be installed to prevent batteries from shifting within the battery box.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 4 August 2021
Resolved
Unapproved wire found to be installed on deck light on top of the pilot house. Wire should be replaced with approved type.
05 - Radio Communications › N/A - No Subsystem › MF/HF Radio installation
Issued 4 August 2021
Resolved
Safety radiotelephony certificate has expired. Acquire a new certificate from a licensed inspector.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Other (machinery)
Issued 4 August 2021
Resolved
Fuel vent flame screens were wasted. Flame screens must be replaced with approved 30x30 mesh.
11 - Life Saving Appliances › N/A - No Subsystem › Lifejackets incl. provision and disposition
Issued 4 August 2021
Resolved
04 life jacket lights were discovered wasted. On Oceans or coastwise route passenger count reduced to 41. Replace water lights with approved to increase passenger count back to 45.
07 - Fire Safety › N/A - No Subsystem › Ventilation
Issued 19 May 2020
Resolved
Provide an adequate means of closing the engine room vents in case of fire emergencies.
13 - Propulsion and Auxiliary Machinery › N/A - No Subsystem › Bilge pumping arrangements
Issued 19 May 2020
Resolved
Repair/replace the collision bulkhead bilge isolation valve.
10 - Safety of Navigation › N/A - No Subsystem › Rudder angle indicator
Issued 19 May 2020
Resolved
Repair the rudder angle indicator in the lazarette.
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 19 May 2020
Resolved
Permanently mount the fish hold pump.
11 - Life Saving Appliances › N/A - No Subsystem › Lifebuoys incl. provision and disposition
Issued 19 May 2020
Resolved
Provide a corrosion resistant clip for the ring buoy floating light line.
99 - Other › N/A - No Subsystem › Other (Safety in general)
Issued 19 May 2020
Resolved
Complete all overdue deficiencies.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Vessel has been identified as having various A/C electrical modifications since initial certification. Sector San Diego does not have vessels electrical plans on file or current installations do not match what we have on file. Provide a one-line electrical drawing for all A/C switchboards and distribution panels. Include all circuit loads, conductor sizes, over current protection, and max panel ratings in amps.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Remove permanently installed extension cord from wheelhouse A/C panel.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Remove dead ended cable and exposed wire nuts from stbd aft locker / tackle rack.
07 - Fire Safety › N/A - No Subsystem › Means of escape
Issued 16 October 2019
Resolved
Relocate / remove vent scoop in-way-of emergency escape ladder.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Re-wire all accommodation compartment fans.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Label all circuit breakers with correct loads in all panels.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Remove permanently installed extension cord in galley.
07 - Fire Safety › N/A - No Subsystem › Other (fire safety)
Issued 16 October 2019
Resolved
Provide galley with non-combustible waste receptacle.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Install outlet cover on receptacle wheelhouse port/side.
09 - Working and Living Conditions › 092 - Working Conditions › Electrical
Issued 16 October 2019
Resolved
Install junction box cover on stbd side wheelhouse.
Lifesaving › Lifejacket/PFD (Type I) › Quantity
Issued 22 June 2016
Resolved
Provide one adult and one child PFD.
Fire Fighting › Remote Fuel Shutoff › General
Issued 22 June 2016
Resolved
Provide emergency fuel valve markings.
Fire Fighting › Ventilation Systems › Ventilation Fire Dampers
Issued 22 June 2016
Resolved
Prove engine room to be reasonably gas tight in the event of a fire.
Electrical › Electrical Distribution System (service) › Outlet Box
Issued 22 June 2016
Resolved
Provide outlet cover in cabinet at the top of berthing ladder.
Operations/Management › Drills/Instruction › Man Overboard Recovery
Issued 22 June 2016
Resolved
Prove proficiency in PIW recovery.
Recorded names · 1
SEEKER (2014). Names as the Coast Guard recorded them in incident records, with the years they appear; some are renames and some are spelling variants.
Ownership record
The Coast Guard's documentation record for this hull -- the Abstract of Title,
with its owners and liens as filed -- is not in PSIX. Ask, and Maury buys it from the National
Vessel Documentation Center, files it here with its date, and every reader of this page gets it.